PARADIGM OFFICIAL DEALER ARGENTINA
Advanced S-Pal™ Satin-Anodized Pure-Aluminum Bass/Midrange Cones. First seen in our Paradigm Reference lineup, very high stiffness-to-mass ratio and outstanding internal damping. The result? Remarkable midrange clarity, superb extended bass response and freedom from unwanted resonances and distortions. In an affordable audio category – unbelieveable quality!
Advanced S-PAL™ Satin-Anodized Pure-Aluminum Domes with powerful neodymium magnets and ferro-fluid cooling for increased power handling! Highs are more soaring and spacious, crystal clear and undiluted even at the higher bandwidths.
Wire Mesh Tweeter Guard and WaveGuide™. More Reference technology, ensuring a smooth, wide panorama of audiophile-quality sound. Wire mesh protection for the pure-aluminum tweeter.
Sophisticated crossovers in an affordable audiophile product! Again, it’s almost unheard of: polypropylene film or bipolar electrolytic capacitors, air core and laminated core inductors, high-power resistors. Crossover topologies are first and second-order with corresponding acoustic slopes of second and third-order providing optimal bandwidth and seamless integration as drivers cross over.
Long-Travel Motor/Magnet Structures. Despite fewer drivers than in previous series’, floorstanding and center channel speakers actually plumb deeper. This is, in part, attributable to the advanced motor/magnet structures: high-temperature copper or aluminum wire voice coils (varies by model) wound on Kapton formers, oversized magnets with all components FEA-optimized.
Foam-Rubber Elastomer Surrounds. Reference Studio Series geometry!
Help achieve that play loud AND play deep effect by allowing longer, expertly controlled cone travel.
Baffled about Baffles? Don’t Be!
For those of you who are wondering. A baffle is the surface on which the speakers or drivers are mounted. It prevents the front and rear sound waves from interfering with each other causing sound cancellation, as well as to absorb sound energy, particularly problematic reflected sound. So a speaker baffle is pretty darn important.
The new Monitor Series 7 baffle is a work of art – worthy of a spot in the arches of a colosseum. It boasts …
A clean aesthetic, nothing to see but the the beautiful drivers, no screws or fasteners visible
- Thick and rigid ¾¿ MDF across the lineup
- FEA-optimized (including a stress analysis) to overcome the limitations of the physical materials.
- A modal frequency analysis allowed us to deliver the most resonance-, vibration- and coloration-free Monitor Series cabinet to date!
- Critically tuned to the rest of the cabinet
- Rap on the baffle … you’ll hurt nothing but your knuckles!
|Design||4-driver, 2-1/2-way bass reflex,
quasi-3rd-order resistive port,
|Crossovers||3rd-order electro-acoustic at 2.0 kHz,
2nd-order electro-acoustic at 700 Hz
(lower bass drivers)
|High-Frequency Driver||25-mm (1 in) S-PAL™ dome tweeter,
ferro-fluid cooled and damped
|Bass / Midrange Driver||140-mm (5-1/2 in) S-PAL™ cone,
25-mm (1 in) high-temperature
voice-coil, oversize ceramic /
ferrite magnets, GRIP™ chassis
|Bass Driver(s)||Two 140-mm (5-1/2 in) carbon-infused
polypropylene cones, 25-mm (1 in)
oversize ceramic / ferrite magnets,
|Low-Frequency Extension*||31 Hz (DIN)|
±2 dB from 46 Hz – 22 kHz
±2 dB from 46 Hz – 18 kHz
|Sensitivity – Room / Anechoic||91 dB / 88 dB|
|Suitable Amplifier Power Range||15 – 200 watts|
|Maximum Input Power†||150 watts|
|Impedance||Compatible with 8 ohms|
|Height, Width, Depth||101.6 cm x 17.5 cm x 26.5 cm
40 in x 6-7/8 in x 10-1/2 in
|Weight (unpacked)||19.1 kg / 42 lb each|
|Finishes||Black Ash, Heritage Cherry|